0
My Basket
GlassProtect Detector (Fibra)
Save
100%
100%
Wired detector that notifies of glass being broken by intruders. It is installed at a distance of 9 m from the window and filters events that cause false alarms about breakage. Detects broken glass using an electret microphone, which registers the sound of impact against the glass and of the glass falling. Two-factor detection of broken glass prevents false alarms caused by thunder, dogs barking and noise from passing trucks.
- Bus connection with 4-core cable, up to 2000 meters (when using twisted pair U/UTP CAT5)
- Electret microphone sensing element
- Up to 9m detection of breakage (180°)
- Alarm signal delivery time of 0.15 s
- Connection for additional detector
| Technical Specifications | |
| Classification | Surface sound security detector |
| Installation method | Indoors |
| Compatibility | Operates with Hub Hybrid (2G) and Hub Hybrid (4G) only |
| Sensing element | Electret microphone |
| Alarm signal delivery time | 0.15s |
| Break detection distance | Up to 9m |
| Horizontal glass break detection angle | 180° |
| Additional detector connection | Wired detector with the normally closed (NC) contact type |
| Fibra technology | Recommended cable type for detector connection: Signal cable (4 x 0.22 copper) / Twisted pair U/UTP CAT5 (4 x 2 x 0.51) Connection wire length: Up to 2000m Device polling period: 12−300 s |
| Power supply | Power supply voltage: 24V Power consumption: up to 45 μA |
| Permissible humidity | Up to 75% |
| Operating temperature range | -10°С to +40°С |
| Anti-sabotage | Protection against fraud Tamper-resistant |
| Dimensions | 90.5mm х 21mm x 18.5mm |
| Weight | 20g |
| Certification | EN 50131 (Grade 2), PD 6662:2017, IP50 |
