Auto-Tracking IP PTZ Camera (16x Optical, LightHunter, WDR)
Part of the UNV LightHunter range, this vandal resistant dome IP PTZ camera boasting an impressive 4 megapixel HD recording resolution and an auto-focusing 16x optical zoom lens. Supporting Ultra265 compression and up to 100m of IR range.
- Vandal Resistant (IK10 Rating)
- Resolution 4MP (2688 x 1520), POE
- Motorised 5.5-88mm Lens, Angles 50.85° ~ 3.47° (H)
- 16x Optical Zoom, 16x Digital Zoom
- Smart IR, Up To 100m IR Range
- Day/Night, IR Cut Filter, 2D/3D DNR
- WDR, OSD, Triple Streams
- Privacy Mask, Motion Mask, ROI
- Supports H.264, H.265 or Ultra 265
- Alarm I/O, 2 Input and 1 Output
- ONVIF Compliance (Profile G, S, T)
- Temperature Range -40°C to 65°C
- Wide voltage range of ±25%
- Metal Housing, IP66 Rated
- 6kV surge protection
Camera
Pan & Tilt
DORI
Day/Night
Network
General
Interface
All dimensions are in millimetres (mm)
This Camera Has The Following Special Features:
ANR (Automatic Network Replenishment)
ANR is a feature which allows a camera to record to an onboard MicroSD card, if it loses connection with the NVR. Once the connection has been re-established, the footage is transferred to the NVR. This feature requires ANR support from the camera and NVR.
IK10 Rating
An IK rating refers to how much mechanical impact a product can resist and is defined in IEC 62262. An IK10 rating means the product is protected against 20 joules impact; this is equivalent to an impact from a 5 kg mass dropped from 400 mm above the impacted surface.
VCA (Video Content Analysis)
VCA is the ability to automatically analyse video to detect temporal and spatial events. This camera has the capability to do the following:
- Audio Detection - Detect a sudden increase or decrease in sound
- Auto Tracking - Tracking a specific target until it is out of range
- Intrusion Detection - Entering and loitering in a pre-defined virtual region
- Line Crossing - Detect when a pre-defined virtual line has been crossed
- Motion Detection - Movement within a pre-defined virtual region
- Tamper Identification - Detect when the camera has been physically tampered with
Tip: Watch in full screen mode